Design and Verification of I2C Protocol using DUC and DDC

Authors

  • Smitha A Department of ECE, BNM Institute of Technology, Bengaluru
  • P A Vijaya Department of ECE, BNM Institute of Technology, Bengaluru

Keywords:

I2C, Verilog, SDA, SCL, FPGA, Digital Up Converter, Digital Down Converter, MATLAB, Transmitter, Receiver

Abstract

I2C or Inter-Integrated Circuit is a synchronous, serial communication protocol. I2C protocol is a Bi-directional communication protocol. I2C is a Multi-Master, Multi-Slave communication protocol designed by NXP semiconductors. This paper provides the literature Survey of I2C and Digital Up/Down Converters and Proposed method for Designing of I2C communication protocol and verification by using DUC (Digital Up Converter) and DDC (Digital Down Converter). I2C communication can be verified by using DUC and DDC. DDC which is the Receiver is designed based on WIMAX approach. DUC, which is the Transmitter, is done in MATLAB and again I2C is done in MATLAB. The transmission from DUC to DDC can be seen by using I2C communication Protocol. So, this paper provides the Literature Survey and Proposed method for the transmission from DUC to DDC using I2C protocol.

Downloads

Download data is not yet available.

Downloads

Published

2020-04-05

How to Cite

[1]
S. A and P. A. Vijaya, “Design and Verification of I2C Protocol using DUC and DDC”, pices, vol. 3, no. 12, pp. 9-12, Apr. 2020.

Issue

Vol. 3 No. 12 (2020): Issue 12 - March 2020

Section

Articles